2016 Nitro ZV18

• Length:18' 11"
• Beam: 102'
• Bottom width: 76'
• Max. recommended HP: 200 HP
• Fuel capacity: 45 Gallons
• Max. person capacity: 5 Persons
• Max. person weight: 1050 Lbs.
• Max. weight capacity : 2000 Lbs.
• Depth inside: 25.5'
• Transom height: 25'
• Deadrise: 17 Degrees
• Draft: 19.75'
• Approx. weight: 2300 Lbs.
• Approx. package weight: 4500 Lbs.
• Package height: 7' 2"
• Package width: 8' 6"
• Storage length: 22' 7"

Comfort, Convenience & Peace of Mind

• NMMA Certified
• Flotation meets or exceeds NMMA & U.S. Coast Guard requirements
• EPA-compliant fuel system
• Gunnels designed to maximize interior space & fishing room
• 4 stainless steel drink holders
• 4 stainless steel pull-up cleats
• Stainless steel bow & stern eyes
• Non-skid bow mat
• Fold-down 4-step stainless steel reboarding ladder
• Stainless steel passenger grab handle
• Fire extinguisher
• Horn

Console(s)

• Bracket-mounted Lowrance® Mark-5x Pro fishfinder
• Hydraulic steering w/custom tilt wheel
• Heavy-duty molded, tinted windscreens
• Custom-molded port & starboard modular consoles w/2-tone paint scheme
• Oversized carpeted, lockable port glovebox
• Below-console footrest w/non-skid mat
• Port & starboard below-console shelves
• Helm below-console recess for optional Hot Foot® pedal
• Veethree® multi-function instrumentation gauges w/speedometer/fuel gauge, tachometer/trim gauge, voltmeter gauge & water pressure gauge
• Stainless steel toggle switches
• Side-mounted LED courtesy light
• Space to mount additional electronics

Construction & Exterior

• Heavy-duty rub rail
• Full-width fiberglass-encapsulated composite transom
• Transverse & longitudinal fiberglass foam-filled stringer system
• Deck & hull chemically bonded & mechanically fastened
• Hand-laid, heavy-duty performance hull w/reinforced sides

Electrical

• Bow panel w/trolling motor receptacle, navigation light, anchor light & trim switches
• 1,000 GPH (3,785.41 LPH) bilge pump
• Stowable navigation stern light
• Heavy-duty Interstate® 24M-RD starting battery
• 2 heavy-duty Interstate® Series SRM-29 trolling batteries
• 2-bank (20 amps total) onboard battery charger w/exterior receptacle
• 2 automotive style, labeled fuse panels w/cover
• Manual LED lighting in bow storage compartments
• Master power switch
• Trolling motor power distribution panel w/50-amp circuit breaker
• Console-mounted 12V accessory outlet
• Waterproof Deutsch plugin gauge connectors
• Water-resistant connectors on all pumps & navigation lights w/protective abrasion-resistant wrap

Interior

• Adjustable helm & passenger seats
• Bike seat w/pedestal
• Folding molded fishing seat w/pedestal
• Bow & aft lockable storage compartments
• Port & starboard bow lockers w/lid assists
• 3-level center rod locker w/organizers for rods up to 8' (2.44 m) long
• Between-console foldout storage drawer w/two 3600 tackle boxes
• Starboard tool holder
• 2 lift-out, molded aft storage boxes that will accept tackle trays (seven 3700s each)
• Integrated port net holder
• Port bow cooler w/removable tray
• 24-oz. plush, marine-grade, cut pile carpet on decks & floor
• Carpet edge trim
• Insulated aluminum lids w/welded corners
• Room to mount additional electronics at bow
• Stainless steel fore & aft rails (port & starboard)
• Stainless steel lockable compression latches

Livewell System(s)

• Aft 26-gal. (98.42 L) insulated Guardian™ anti-slosh rotomolded livewell w/rounded corners, removable divider & bait bucket
• Two 500 GPH (1,892.71 LPH) aerator/fill pumps w/timers (1 for baitwell, 1 for livewell)
• Two 750 GPH (2,839.06 LPH) recirculator pumps w/timers (1 for baitwell, 1 for livewell)
• Aeration system
• Pump-out systems (baitwell & livewell)
• Positive livewell lid latching to keep lid closed at speed & in rough conditions
• Insulated aluminum lids w/welded corners

Performance

• Deep V performance hull
• Lifting strakes to maximize overall handling & performance
• Transom designed for Kicker motor application
• Rigging tube
• Stainless steel propeller

Trailer

• NEW inside the frame brake line system w/one-point bleed
• Custom-fit, factory-matched, tandem-axle NITRO® drive-on trailer w/color-coordinated powder-coat finish & GALVASHIELD® corrosion protection
• Surge disc brakes on 1 axle
• 14" (35.56 cm) custom NITRO® aluminum wheels w/radial tires
• No Touch Vortex hub lubrication system for no-maintenance peace of mind w/6-yr. 100,000-mile limited warranty
• Spare tire carrier (spare tire avail. at additional cost)
• All-welded rectangular tube frame for a unitized structure w/exceptional strength-to-weight ratio
• Space-saving swing-away tongue to reduce storage length
• 1,200-lb. Fulton swing-up locking jack w/swivel wheel
• Heavy-duty winch w/non-binding nylon strap & bow safety strap
• Outboard motor support to reduce hull & transom stress while towing
• Steel fenders w/diamond-tread step plates
• Carpeted bunks & fender boards to protect hull
• Submersible lights
• Safety cables

Trolling Motor

• Pedal recess that will accommodate Minn Kota® or MotorGuide® trolling motor pedal
• Minn Kota® PowerDrive 24V, 70-lb. thrust, 60" (1.52 m) composite shaft, foot-control trolling motor w/Universal Sonar 2